Abdoli, M., & Esfandiari, E. (2018). The effects of hydro-priming on germination and growth characteristics of wheat seedling (Triticum aestivum L.) under drought stress. Journal of Seed Research, 8(3), 60–72. [In Persian]
Afzal, I., Javed, T., Amirkhani, M., & Taylor, A. G. (2020). Modern seed technology: Seed coating delivery systems for enhancing seed and crop performance.
Agriculture,
10(11), 526.
https://doi.org/10.3390/agriculture10110526
Akelah, A. (2013). Functionalized polymeric materials in agriculture and the food industry. Springer Science & Business Media.
Alimagham, S. M., & Ghaderi-Far, F. (2014). Hydrotime model: Introduction and application of this model in seed researches.
Environmental Stresses in Crop Sciences,
7(1), 41–52.
https://doi.org/10.22077/escs.2014.154 [In Persian]
Arum, A. P., & Setiyono. (2023). Application of ι-carrageenan/agarose hydrogel as super adsorbent hydrophilic polymers natural seed coating for improving tobacco seed germination under drought stress.
Journal of Agricultural and Applied Biology,
4(2), 144–150.
https://doi.org/10.11594/jaab.04.02.04
Barros, A. F. D., Pimentel, L. D., Araujo, E. F., Macedo, L. R. D., Martinez, H. E. P., Batista, V. A. P., & Paixão, M. Q. D. (2017). Super absorbent polymer application in seeds and planting furrow: Will it be a new opportunity for rainfed agriculture?
Ciências Agrárias,
38(4), 1703–1714.
https://doi.org/10.5433/1679-0359.2017v38n4p1703
Batlla, D., & Benech-Arnold, R. L. (2004). A predictive model for dormancy loss in
Polygonum aviculare L. seeds based on changes in population hydrotime parameters.
Seed Science Research,
14(4), 277–286.
https://doi.org/10.1079/SSR2004177
Behboud, R., & Mordi, A. (2022). Improvement of sweet corn (
Zea mays var.
Saccharata) seed germination using seed coating.
Iranian Journal of Seed Science and Technology,
11(3), 1–17.
https://doi.org/10.22092/ijsst.2021.342879.1342 [In Persian]
Bradford, K. J., & Somasco, O. A. (1994). Water relations of lettuce seed thermoinhibition: I. Priming and endosperm effects on base water potential.
Seed Science Research,
4(1), 1–10.
https://doi.org/10.1017/S0960258500001938
Changizian, M., Tohidloo, G., & Forozsh, M. (2015). Study of different polymer coatings on sugar beet seed germination characteristics and plant establishment. Iranian Journal of Seed Science and Technology, 4(2), 107–117. [In Persian]
Copeland, L. O., & McDonald, M. B. (2001). Principles of seed science and technology (4th ed.). Kluwer Academic Publishers.
Dahal, P., & Bradford, K. J. (1990). Effects of priming and endosperm integrity on seed germination rates of tomato genotypes.
Journal of Experimental Botany,
41(232), 1441–1453.
https://doi.org/10.1093/jxb/41.11.1441
Daiyoulhagh, D., Rashidi, V., Aharizad, S., Farahvash, F., & Mershekari, B. (2022). Yield stability analysis of advanced spring wheat genotypes under non-stress and drought stress conditions.
Plant Production,
44(4), 489–502.
https://doi.org/10.22055/ppd.2020.33143.1889 [In Persian]
Derakhshan, A., & Gharineh, M. H. (2015). Application of hydrotime concept to predict seedling emergence of spring barley varieties in field. Iranian Journal of Seed Science and Research, 2(2), 1–14. [In Persian]
Ghanifathi, T., Valizadeh, M., Shahryari, R., & Shahbazi, H. (2011). Effect of drought stress on germination indices and seedling growth of 12 bread wheat genotypes. Advances in Environmental Biology, 5(6), 1034–1039.
Gubišová, M., Hudcovicová, M., Hrdlicová, M., Ondreicková, K., & Cilík, P. (2024). Superabsorbent seed coating and its impact on fungicide efficacy in a combined treatment of barley seeds.
Agriculture,
14(5), 707.
https://doi.org/10.3390/agriculture14050707
Hotta, M., Kennedy, J., Higginbotham, C., & Morris, N. (2014). Synthesis and characterisation of novel ι-carrageenan hydrogel blends for agricultural seed coating application.
Applied Mechanics and Materials,
679, 81–91.
https://doi.org/10.4028/www.scientific.net/AMM.679.81
Kaufman, G. (1991). Seed coating: A tool for stand establishment: A stimulus to seed quality. HortTechnology, 1(1), 98–102.
Krasnopeeva, E. L., Panova, G. G., & Yakimansky, A. V. (2022). Agricultural applications of superabsorbent polymer hydrogels.
International Journal of Molecular Sciences,
23(23), 15134.
https://doi.org/10.3390/ijms232315134
Kumar, J., Nisar, K., Kumar, M. B. A., Walia, S., Shakil, N. A., Prasad, R., & Parmar, B. S. (2007). Development of polymeric seed coats for seed quality enhancement of soybean (
Glycine max).
Indian Journal of Agricultural Sciences,
77(11), 738–743.
https://epubs.icar.org.in/index.php/IJAgS/article/view/3071
Majer, P., Sass, L., Lelley, T., Cseuz, L., Vass, I., Dudits, D., & Pauk, J. (2008). Testing drought tolerance of wheat by a complex stress diagnostic system installed in greenhouse. Acta Biologica Szegediensis, 52(1), 97–100.
Mehrabi, H. R., Chaichi, M. R., Tavakolafshari, R., Madah Arefi, H., & Zahedi Amiri, G. (2010). Effects of seed coating methods on seed germination of Sanguisorba minor in different soil moisture levels and sowing depths. Iranian Journal of Range and Desert Research, 17(3), 489–498. [In Persian]
Mehrabi, H. R., Chaichi, M. R., Tavakolafshari, R., & Rezaei, S. (2017). Study on effect of seed coating on seedling emergence of wheat (
Triticum aestivum, cultivar Sardari) in different moisture stress levels and planting depths.
Iranian Journal of Seed Science and Technology,
6(1), 49–56.
https://doi.org/10.22034/ijsst.2017.113287 [In Persian]
Mesgaran, M. B., Mashhadi, H. R., Alizadeh, H., Hunt, J., Young, K. R., & Cousens, R. D. (2013). Importance of distribution function selection for hydrothermal time models of seed germination.
Weed Research,
53(2), 89–101.
https://doi.org/10.1111/wre.12008
Ministry of Jihad-e-Agriculture. (2023). Crops area, production and yield in 2021–2022 crop year report. Information and Communication Technology Center. [In Persian]
Nakhjavani Moghadam, M. M., & Ghahremani, B. (2004). Investigation of the effect of water stress on ET and yield criteria of winter wheat. Agricultural Science and Industry, 18(2), 139–148. [In Persian]
Ovalesha, M. A., Yadav, B., & Rai, P. K. (2017). Effects of polymer seed coating and seed treatment on plant growth, seed yield and quality of cowpea (Vigna unguiculata). Journal of Pharmacognosy and Phytochemistry, 6(4), 106–109.
Patane, C., Satia, A., Tubeileh, A., Cosentino, S. L., & Cavallaro, V. (2016). Modeling seed germination of unprimed and primed seeds of sweet sorghum under PEG-induced water stress through the hydrotime analysis.
Acta Physiologiae Plantarum,
38(5), 115.
https://doi.org/10.1007/s11738-016-2135-5
Pedrini, S., Bhalsing, K., Cross, A. T., & Dixon, K. V. (2018). Protocol development tool (PDT) for seed encrusting and pelleting.
Seed Science and Technology,
46(2), 393–405.
https://doi.org/10.15258/sst.2018.46.2.21
Rašovský, M., Pačuta, V., Gažo, J., Nika, B., Lenická, D., Michalska-Klimczak, B., & Wyszyňski, Z. (2023). Impact of seed coating with superabsorbent polymers on morphological, physiological and production traits of maize (
Zea mays L.).
Plant, Soil and Environment,
69(12), 586–595.
https://doi.org/10.17221/209/2023-PSE
Shirazi, E., Fazeli-Nasab, B., Ramshin, H. A., Fazel-Najaf-Abadi, & Izadi-Darbandi, A. (2016). Evaluation of drought tolerance in wheat genotypes under drought stress at germination stage.
Journal of Crop Breeding,
8(20), 207–219.
https://doi.org/20.1001.1.22286128.1395.8.20.2.9 [In Persian]
Soltani, A. (2007). Application of SAS in statistical analysis. Jihad Daneshgahi Publication of Mashhad. [In Persian]
Soltani, A., Zeinali, E., Galeshi, S., & Latifi, N. (2001). Genetic variation for and interrelationships among seed vigor traits in wheat from the Caspian Sea coast of Iran. Seed Science and Technology, 29(3), 653–662.
Sumalata, B., Parashivamurthy, P., & Siddaraju, R. (2017). Effect of seed film coating polymers on growth and yield of maize hybrid Hema. Mysore Journal of Agricultural Sciences, 51(1), 108–112.
Tabatabaei, S. A., & Ansari, O. (2018). Quantification of safflower (
Carthamus tinctorius) seed germination response to water potential and priming: Hydrotime models on the basis of normal, Weibull and Gumbel distributions.
Environmental Stresses in Crop Sciences,
11(2), 327–340.
https://doi.org/10.22077/escs.2017.383.1077 [In Persian]
Taghi Zoghi, S., Soltani, E., Alahdadi, I., & Sadeghi, R. (2018). The effect of different seed coating treatments on seed germination of canola under drought and salinity stresses, using modeling approach.
Crop Improvement,
20(3), 577–592.
https://doi.org/10.22059/jci.2018.238846.1807 [In Persian]
Tatari, S., Ghaderi-Far, F., Yamchi, A., Siahmarguee, A., Shayanfar, A., & Baskin, C. C. (2021). Application of the hydrotime model to assess seed priming effects on the germination of rapeseed (
Brassica napus L.) in response to water stress.
Botany,
98(5), 283–291.
https://doi.org/10.1139/cjb-2019-0192
Toselli, M. E., & Casenave, E. C. (2004). Hydropriming and cottonseed germination under unfavourable conditions: Modifications in hydrotime model parameters.
Seed Science and Technology,
33(1), 87–96.
https://doi.org/10.15258/sst.2005.33.1.09
Vanangamudi, K., Srimathi, P., Natarajan, N., & Bhaskaran, M. (2003). Current scenario of seed coating polymer. In ICAR: Short course on seed hardening and pelleting technologies for rain fed or garden land ecosystems (pp. 80–100).
Windauer, L., Altuna, A., & Benech-Arnold, R. (2007). Hydrotime analysis of
Lesquerella fendleri seed germination responses to priming treatments.
Industrial Crops and Products,
25(1), 70–74.
https://doi.org/10.1016/j.indcrop.2006.07.004
Zareyan, A., Hamidi, A., Hasani, F., & Tabatabaei, S. A. (2019). Effect of drought stress and potassium foliar application on seed germination characteristics and seedling vigour of wheat (
Triticum aestivum L.).
Iranian Journal of Seed Science and Research,
6(2), 145–159.
https://doi.org/10.22124/jms.2019.3594 [In Persian]
Zohuriaan-Mehr, M. J., & Kabiri, K. (2008). Superabsorbent polymer materials: A review. Iranian Polymer Journal, 17(6), 451–477.
)